ZyXEL Communications vantage access 13.9 LAN Configuration Security, 13.10 IP Ping Diagnostics

Chapter 13 General Device Setup

13.9 LAN Configuration Security

Use the LANConfigSecurity screen to display and configure the password to allow LAN access on the device for auto-configuration settings. Refer to Section 11.2.4 on page 132 for other field descriptions.

Select a registered device in the Device List window and click Provision >

InternetGatewayDevice > LANConfigSecurity.

Figure 77 TR-069: LANConfigSecurity

13.10 IP Ping Diagnostics

Use the IPPingDiagnostics screen to configure the ping test settings on a device.

Select a registered device in the Device List window and click Provision InternetGatewayDevice > IPPingDiagnostics.

Figure 78 TR-069: IPPingDiagnostics

The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 35 TR-069: IPPingDiagnostics

LABEL	DESCRIPTION
DiagnosticsState	This field displays the ping test result.

Interface	This field displays the hierarchical name of the interface for ping diagnostics.
	For example, “InternetGatewayDevice.WANDevice.1.-
	WANConnectionDevice.1.WANPPPConnection.1”
	You can enter up to 256 characters for the interface name.

	151
Vantage Access User’s Guide	151