Chapter 23 STB Service
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 266
PARAMETER NAME | VALUE |
DecodedFrames | This displays the number of audio frames that were decoded completely or |
| partially for this AV stream. |
|
|
DecodingErrors | This displays the number of audio decoding errors for this AV stream. |
|
|
You can view information about each Main Stream instance’s video decoder statistics in the VideoResponseStats screen.
1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.
2Click a number and ServiceMonitoring.
3Click MainStream, then click a number to display the screen.
4Click Total, then click VideoResponseStats.
Figure 450
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 267
PARAMETER NAME | VALUE |
MinimumVideoSystem | This displays the minimum time period between the transmission of an IGMP |
Response | JOIN command (or an RTSP SETUP command) and the display of the first I |
| frame, for this AV stream. |
|
|
MaximumVideoSyste | This displays the maximum time period between the transmission of an IGMP |
mResponse | JOIN command (or an RTSP SETUP command) and the display of the first I |
| frame, for this AV stream. |
|
|
You can view information about each Main Stream instance’s sample statistics (sample statistics collected since collection was last enabled or reset) in the Sample screen.
1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.
2Click a number and ServiceMonitoring.
3Click MainStream, then click a number to display the screen.
4Click Sample.
458 |
| |
Vantage Access User’s Guide |
| |
|
|
|