Chapter 25 LAN
Table 287
PARAMETER | VALUE | |
NAME | ||
| ||
MinimumRespons | This field displays the minimum response time (in milliseconds) of all ping tests. | |
eTime |
| |
|
| |
MaximumRespon | This field displays the maximum response time (in milliseconds) of all ping tests. | |
seTime |
| |
|
|
25.5 Traceroute Diagnostics
Use the TraceRouteDiagnostics screen to view or configure traceroute test settings for a device.
Select a registered device in the Device List window and click Device > LAN. Click TraceRouteDiagnostics.
Figure 475
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 288
PARAMETER | VALUE | |
NAME | ||
| ||
DiagnosticsState | This field displays the availability of the diagnostics result. | |
|
| |
Host | This field displays the name or the IP address of the host device to which to trace | |
| route. | |
|
| |
Timeout | This field displays the timeout (in milliseconds) for a trace route test. | |
|
| |
DataBlockSize | This field displays the size of the data block (in bytes) to send for each traceroute. | |
|
| |
MaxHopCount | This field displays the maximum number of hops used in outgoing probe packets. | |
|
| |
DSCP | This field displays the DiffServ Code Point (DSCP) value for the outgoing probe | |
| packets. | |
|
| |
ResponseTime | This field displays the response time (in milliseconds) of the most recent | |
| traceroute test. | |
|
| |
NumberOfRouteH | This field displays the number of hops for the discovered route. | |
ops |
| |
|
|
| 485 |
Vantage Access User’s Guide | |
|
|