Chapter 20 LAN Device

Table 138 TR-098 Amendment 1: LAN Device: LANHostConfigManagement (continued)

PARAMETER NAME

VALUE

AllowedMACAddresses

This field displays the MAC address(es) allowed to pass through the LAN.

 

 

IPInterfaceNumberOfEntri

This field displays the number of IP subnets on the LAN.

es

This field is 1 if IP alias is not supported on the LAN.

 

 

20.2.1 IP Interface

The IPInterface screen allows you to view IP settings per each subnet on the LAN. Refer to Section 11.2.4 on page 132 for other field descriptions.

Select a registered device in the Device List window and click Data Model > InternetGatewayDevice > LANDevice > LANHostConfigManagement. Click IPInterface

to display the screen.

Figure 253 TR-098 Amendment 1: LAN Device: IPInterface

20.2.2 IP Interface Details

Use this screen to view detailed IP interface information.

1Select a registered device in the Device List window and click Data Model > InternetGatewayDevice > LANDevice.

2Click a number and LANHostConfigManagement.

3Click IPInterface and a number to display the screen.

Figure 254 TR-098 Amendment 1: LAN Device: IPInterface: Details

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 139 TR-098 Amendment 1: LAN Device: IPInterface: Details

PARAMETER NAME

VALUE

Enable

This field displays 1 to indicate that the LAN interface is enabled.

 

0 means the LAN interface is disabled and no traffic is allowed through.

 

 

IPInterfaceIPAddress

This field displays the LAN IP address of the device in dotted decimal notation,

 

for example, 192.168.1.1.

 

 

312

 

Vantage Access User’s Guide