![](/images/backgrounds/75974/75974-620209x1.png)
Chapter 16 General Device Setup
16.9 Layer2 Bridging
Use the Layer2Bridging screen to configure the bridge settings between layer2 LAN and/or WAN interfaces on the device.
Select a registered device in the Device List window and click Provision > Data Model > InternetGatewayDevice > Layer2Bridging.
Figure 142
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 74
LABEL | DESCRIPTION |
MaxBridgeEntries | This field displays the maximum number of entries in the bridge table. |
|
|
MaxFilterEntries | This field displays the maximum number of entries in the filter table. |
|
|
MaxMarkingEntries | This field displays the maximum number of entries in the marking table. |
|
|
BridgeNumberOfEnt | This field displays the number of entries in the bridge table. |
ries |
|
|
|
FilterNumberOfEntri | This field displays the number of entries in the filter table. |
es |
|
|
|
MarkingNumberOfE | This field displays the number of entries in the marking table. |
ntries |
|
|
|
AvailableInterfaceNu | This field displays the number of entries in the interface table. |
mberOfEntries |
|
|
|
16.9.1 Bridging Table
Use the Bridge screen to view the bridge table list on the device. Refer to Section 11.2.4 on page 132 for other field descriptions.
Select a registered device in the Device List window and click Provision > Data Model > InternetGatewayDevice > Layer2Bridging > Bridge.
Figure 143
| 209 |
Vantage Access User’s Guide | |
|
|