Chapter 38 Call Center

38.1.1 Default Gateway Setting Example

Follow the steps below to configure a CPE method, Device.LAN.DefaultGateway , using a call center account.

1Enter the beginning charactors of a parameter name in the Parameter Name field. For example, “Device.L”. The matching parameters appear in the list.

You can also enter a full parameter name or copy and paste a parameter name from the Task Monitor section of this screen. Select the parameter you want to configure.

2The CPE Method field appears. Select the method you want to configure, such as SetParameterValues in this example.

3Additional fields appear. These fields may vary depending on the CPE method you selected. Configure them. For example, enter 192.168.1.254 to change the LAN default gateway IP on the CPE device. Click Apply to apply the change.

574

 

Vantage Access User’s Guide