Chapter 16 General Device Setup

Figure 162 TR-098: LANConfigSecurity

16.12 IP Ping Diagnostics

Use the IPPingDiagnostics screen to configure the ping test settings on a device.

Select a registered device in the Device List window and click Provision > Data Model > InternetGatewayDevice > IPPingDiagnostics.

Figure 163 TR-098: IPPingDiagnostics

The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 85 TR-098: IPPingDiagnostics

LABEL

DESCRIPTION

DiagnosticsState

This field displays the ping test result.

 

 

Interface

This field displays the hierarchical name of the interface for ping diagnostics.

 

For example,

 

“InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPCo

 

nnection.1”.

 

You can enter up to 256 characters for the interface name.

 

 

Host

This field displays the IP address or domain name of the host the device is to

 

ping to test the connection.

 

 

NumberOfRepetition

This field displays the number of ping test before displaying the result.

s

 

 

 

Timeout

This field displays the timeout (in milli-seconds) for a ping test.

 

 

DataBlockSize

This field displays the size of the packet to send for each ping test.

 

 

DSCP

This field displays the DiffServ Code Point (DSCP) to use for the test packets.

 

The default is 0.

 

 

226

 

Vantage Access User’s Guide