Chapter 18 WAN Device

 

Table 100 TR-098: WAN Device: WANDSLInterfaceConfig: Stats (Total) (continued)

 

PARAMETER NAME

VALUE

 

ErroredSecs

This field displays the number of Errored Seconds.

 

 

 

 

SeverelyErroredSecs

This field displays the number of Severely Errored Seconds.

 

 

 

 

FECErrors

This field displays the number of FEC errors.

 

 

 

 

ATUCFECErrors

This field displays the number of FEC errors detected by the ATU-C.

 

 

 

 

HECErrors

This field displays the number of HEC errors.

 

 

 

 

ATUCHECErrors

This field displays the number of HEC errors detected by the ATU-C.

 

 

 

 

CRCErrors

This field displays the number of CRC errors.

 

 

 

 

ATUCCRCErrors

This field displays the number of CRC errors detected by the ATU-C.

 

 

 

18.4 WAN Ethernet Interface Configuration

You can set the Ethernet settings on the WAN interface in the WANEthernetInterfaceConfig screen.

Select a registered device in the Device List window and click Data Model > InternetGatewayDevice > WANDevice. Click a number and WANEthernetInterfaceConfig to display the screen.

Figure 193 TR-098: WAN Device: WANEthernetInterfaceConfig

The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 101 TR-098: WAN Device: WANEthernetInterfaceConfig

PARAMETER

VALUE

NAME

 

Enable

This field displays 1 to indicate that this interface is active; otherwise, it displays 0.

 

 

Status

This field displays the status of this interface.

 

 

MACAddress

This field displays the MAC address of the interface.

 

 

MaxBitRate

This field displays the maximum link speed (10, 100 or Auto) on the interface.

 

 

DuplexMode

This field displays the duplex mode (Half, Full or Auto) for the interface.

 

 

18.4.1 WAN Ethernet Statistics

View the statistics for the WAN interface in the Stats screen.

 

253

Vantage Access User’s Guide