Chapter 21 WAN Device
Table 157
PARAMETER NAME | VALUE |
ATMCRCErrors | This field displays the number of ATM layer cyclic redundancy check errors. |
|
|
ATMHECErrors | This field displays the number of Header Error Check related errors at the |
| ATM layer. |
|
|
21.10 WAN ATM F5 Loopback Diagnostics
Use the WANATMF5LoopbackDiagnostics screen to view loopback diagnostic (ping) test results and to configure timeout settings for the ping test on the ATM layer.
1Select a registered device in the Device List window and click Data Model > InternetGatewayDevice > WANDevice.
2Click a number and WANConnectionDevice.
3Click a number and WANATMF5LoopbackDiagnostics to display the screen as shown.
Figure 288
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 158
PARAMETER NAME | VALUE |
DiagnosticsState | This field displays the availability of the ping test result. Requested means |
| a test is to be initiated. |
|
|
NumberOfRepetitions | This field displays the number of ping tests (between 1 and 4294967295) to |
| perform before displaying the test results. |
|
|
Timeout | This field displays the timeout (between 1 and 4294967295 milliseconds) |
| for the ping test. |
|
|
SuccessCount | This field displays the number of pings that received a successful response |
| within the timeout in the most recent ping test. |
|
|
FailureCount | This field displays the number of pings that failed to receive a successful |
| response within the timeout in the most recent ping test. |
|
|
AverageResponseTime | This field displays the average response time (in milliseconds) of all pings |
| that received a successful response in the most recent ping test. |
| If there is no successful response from the ping test, this field displays zero. |
|
|
340 |
| |
Vantage Access User’s Guide |
| |
|
|
|