Chapter 22 Voice Service

2Click a number and VoiceProfile.

3Click a number and RTP.

4Click RTCP to display the configuration screen.

Figure 321 TR-104: VoiceService: VoiceProfile: RTP: RTCP

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 178 TR-104: VoiceService: VoiceProfile: RTP: RTCP

PARAMETER NAME

VALUE

Enable

This field displays whether RTCP is enabled or disabled.

 

 

TxRepeatInterval

This field displays the repeat transmission interval (in milliseconds).

 

 

LocalCName

This field displays the local Cname (canonical name).

 

 

22.9.2 Voice Profile SRTP Setup

Use the SRTP screen to configure SRTP (Secure Real-time Transport Protocol) settings for sending voice traffic on the device.

1Select a registered device in the Device List window and click Data Model > Device > Services > VoiceService.

2Click a number and VoiceProfile.

3Click a number and RTP.

4Click SRTP to display the configuration screen.

Figure 322 TR-104: VoiceService: VoiceProfile: RTP: SRTP

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 179 TR-104: VoiceService: VoiceProfile: RTP: SRTP

PARAMETER NAME

VALUE

Enable

This field displays whether SRTP is enabled or disabled.

 

 

KeyingMethods

This field displays the keying methods the device can use.

 

 

EncryptionKeySizes

This field displays the encryption key sizes the device can use.

 

 

 

373

Vantage Access User’s Guide