Chapter 22 Voice Service

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 187 TR-104: VoiceService: VoiceProfile: ButtonMap: Button: Details

PARAMETER NAME

VALUE

ButtonName

This field displays the name of the button.

 

 

FacilityAction

This field displays the name of the optional facility action.

 

 

FacilityActionArgumen

This field displays the argument for the optional facility action.

t

 

 

 

QuickDialNumber

This field displays the quick dial number.

 

 

ButtonMessage

This field displays the text a user sees on the screen when the button is

 

pressed.

 

 

UserAccess

This field displays whether the user is allowed to change the button settings.

 

 

22.13 Voice Profile FaxT38

Use the FaxT38 screen to configure fax T38 relay settings.

1Select a registered device in the Device List window and click Data Model > Device > Services > VoiceService.

2Click a number and VoiceProfile.

3Click a number and FaxT38 to display the screen.

Figure 337 TR-104: VoiceService: VoiceProfile: FaxT38

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 188 TR-104: VoiceService: VoiceProfile: FaxT38

PARAMETER NAME

VALUE

Enable

This field displays whether T38 is enabled or not.

 

 

BitRate

This field displays the maximum bit rate for fax transmission.

 

 

HighSpeedPacketRat

This field displays the rate at which high speed data will be sent.

e

 

 

 

HighSpeedRedundan

This field displays the packet-level redundancy for high speed transmission.

cy

 

 

 

LowSpeedRedundanc

This field displays the packet-level redundancy for low speed transmission.

y

 

 

 

TCFMethod

This field displays the method used to send data through the network.

 

 

382

 

Vantage Access User’s Guide