Chapter 18 WAN Device
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 108
PARAMETER NAME | VALUE |
Enable | This field displays 1 to indicate that the POTS link is active; otherwise it |
| displays 0. |
LinkStatus | This field displays the link status (Up, Down, Dialing, Connecting or |
| Unavailable). |
|
|
ISPPhoneNumber | This field displays the phone number (up to 64 digits in countrycode- |
| |
| |
| Multiple phone numbers are separated with a colon (:). |
|
|
ISPInfo | This field displays a descriptive name (up to 64 characters) to identify this |
| ISP. |
|
|
LinkType | The default link type is PPP_Dialup. |
|
|
NumberOfRetries | This field displays the number of times (between 0 and 4294967295) the |
| CPE device is to |
|
|
DelayBetweenRetries | This field displays the time (in milliseconds) the CPE device is to wait |
| before attempting to connect to the ISP again. |
|
|
Fclass | This field indicates the transmission functions the CPE device is capable of. |
| 0:data |
| 1, 2, 2.0: fax |
| 8: voice |
| 80: DSVD |
|
|
DataModulationSupporte | This field displays the modulation method(s) supported for data transfer. |
d |
|
|
|
DataProtocol | This field displays the protocol(s) supported for data transfer. |
|
|
DataCompression | This field displays the compression method used for data transfer. |
|
|
PlusVTRCommandSupp | This field indicates whether |
orted |
|
|
|
18.13 WAN IP Connection
You can view the IP settings for the WAN connection in the WANIPConnection screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
1Select a registered device in the Device List window and click Data Model > InternetGatewayDevice > WANDevice.
2Click a number and WANConnectionDevice.
3Click a number and WANIPConnection to display the screen as shown.
Figure 205
262 |
| |
Vantage Access User’s Guide |
| |
|
|
|