Chapter 15 WAN Device

Figure 129 TR-069: WAN Device: WANPPPConnection: PortMapping: Details

The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 63 TR-069: WAN Device: WANPPPConnection: PortMapping: Details

PARAMETER NAME

VALUE

PortMappingEnabled

This field displays 1 to indicate that the port mapping entry on this link is

 

enabled; otherwise this field displays 0.

PortMappingLeaseDurati

This field displays the time (between 1 to 4294967295 seconds) the device

on

stores the port mapping entry. After this, the entry is removed from the port

 

mapping table.

 

0 means that a port mapping entry is static and cannot be removed from

 

the port mapping table.

 

 

RemoteHost

This field displays the IP address of the remote host device.

 

If this field is blank, it indicates a wildcard which the device must support. In

 

this case, when a packet is sent to the external port on the WAN, the device

 

will forward the packet to the internal port.

 

 

ExternalPort

This field displays a port number (between 0 and 4294967295) the device

 

listens on for NAT connection requests.

 

0 indicates a wildcard. This sets the device to forward a wildcard packet to

 

the internal port.

 

 

InternalPort

This field displays a port number for the internal port (between 1 and

 

4294967295) to which the device forwards packets with wildcard.

 

 

PortMappingProtocol

This field displays the protocol (UDP or TCP) used for port mapping.

 

 

InternalClient

This field displays the IP address or domain name of a host on the LAN.

 

To allow UDP port mapping or multiple NAT clients to use the same port

 

number, use the broadcast address of 255.255.255.255 for the internal

 

client.

 

 

PortMappingDescription

This field displays a descriptive name (up to 256 characters) to identify this

 

port mapping entry.

 

 

15.14.4 WAN PPP Connection Statistics

Display the Stats screen to view the statistics of all PPP connections on the WAN interface.

1Select a registered device in the Device List window and click InternetGatewayDevice > WANDevice.

2Click a number and WANConnectionDevice.

3Click a number and WANPPPConnection.

4Click a number and Stats to display the screen as shown.

 

195

Vantage Access User’s Guide