Chapter 17 LAN Device
Table 87
PARAMETER NAME | VALUE |
AllowedMACAddresses | This field displays the MAC address(es) allowed to pass through the LAN. |
|
|
IPInterfaceNumberOfEntri | This field displays the number of IP subnets on the LAN. |
es | This field is 1 if IP alias is not supported on the LAN. |
|
|
The IPInterface screen allows you to view IP settings per each subnet on the LAN. Refer to Section 11.2.4 on page 132 for other field descriptions.
Select a registered device in the Device List window and click Provision > Data Model > InternetGatewayDevice > LANDevice > LANHostConfigManagement. Click IPInterface to display the screen.
Figure 167
Use this screen to view detailed IP interface information.
1Select a registered device in the Device List window and click Data Model > InternetGatewayDevice > LANDevice.
2Click a number and LANHostConfigManagement.
3Click IPInterface and a number to display the screen.
Figure 168
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 88
PARAMETER NAME | VALUE |
Enable | This field displays 1 to indicate that the LAN interface is enabled. |
| 0 means the LAN interface is disabled and no traffic is allowed through. |
|
|
IPInterfaceIPAddress | This field displays the LAN IP address of the device in dotted decimal notation, |
| for example, 192.168.1.1. |
|
|
232 |
| |
Vantage Access User’s Guide |
| |
|
|
|