Chapter 23 STB Service

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and Capabilities.

3Click Video Decoder > MPEG4Part2 > ProfileLevel. Click a number to display the screen.

Figure 376 TR-135: STBService: Capabilities: MPEG4Part2 ProfileLevel Settings

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 213 TR-135: STBService: Capabilities: MPEG4Part2 ProfileLevel Settings

PARAMETER NAME

VALUE

Profile

This displays the MPEG4 part 2 profile.

 

 

Level

This displays the MPEG4 part 2 level.

 

 

MaximumDecodingCa

This displays the maximum decoding capability for this video standard in

pability

kilobits per second.

 

 

23.2.12 MPEG4 Part 10 Setup

You can view and configure MPEG4 Part 10 settings in the MPEG2Part2 screen. This screen displays the set of supported MPEG4 profiles. It also displays the set of audio standards supported when MPEG4 Part 10 is used.

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and Capabilities.

3Click Video Decoder > MPEG4Part10 to display the screen.

Figure 377 TR-135: STBService: Capabilities: MPEG4Part10

412

 

Vantage Access User’s Guide