Chapter 14 LAN Device

 

Table 38 TR-069: LAN Device: IPInterface: Details (continued)

 

PARAMETER NAME

VALUE

 

IPInterfaceSubnetMas

This field displays the subnet mask on the LAN. For example, 255.255.255.0.

 

k

 

 

 

 

 

IPInterfaceAddressing

This field displays the method to assign IP address on the LAN interface.

 

Type

DHCP means the device is set to assign IP addresses from a DHCP server.

 

 

Static means the device is set to use a fixed IP address configured in the field

 

 

above.

 

 

AutoIP means the device is set to use the default IP settings on the LAN

 

 

interface.

 

 

 

14.3 LAN Ethernet Interface

The LANEthernetInterfaceConfig screen allows you to view LAN Ethernet settings. Refer to Section 11.2.4 on page 132 for other field descriptions.

Select a registered device in the Device List window and click InternetGatewayDevice > LANDevice. Then click a number and LANEthernetInterfaceConfig to display the screen.

Figure 84 TR-069: LAN Device: LANEthernetInterfaceConfig

14.3.1LAN Ethernet Interface Details

1Select a registered device in the Device List window and click Configuration > InternetGatewayDevice > LANDevice.

2Click a number and LANEthernetInterfaceConfig.

3Click a number to display the configuration screen for a LAN Ethernet interface.

Use this screen to enable or disable the LAN Ethernet interface, configure the port speed and duplex mode. You can also use this screen to enable or disable static MAC address learning.

Figure 85 TR-069: LAN Device: LANEthernetInterfaceConfig: Details

 

157

Vantage Access User’s Guide