4. OPERATION AND DISPLAY
4.4 Test operation mode
| The test operation mode is designed for servo operation confirmation and not for | |
CAUTION | machine operation confirmation. Do not use this mode with the machine. Always | |
use the servo motor alone. | ||
| ||
| If an operation fault occurred, use the forced stop (EM1) to make a stop. |
By using a personal computer and the servo configuration software
(1) Test operation mode
(a) Jog operation
Jog operation can be performed without using the servo system controller. Use this operation with the forced stop reset. This operation may be used independently of whether the servo is on or off and whether the servo system controller is connected or not.
Exercise control on the jog operation screen of the Servo configuration software.
1) Operation pattern
Item | Initial value | Setting range |
|
|
|
Speed [r/min] | 200 | 0 to max. speed |
Acceleration/deceleration time constant [ms] | 1000 | 1 to 20000 |
2) Operation method
Operation
Forward rotation start
Reverse rotation start
Stop
Screen control
Press Forward (G) button.
Press Reverse (R) button.
Press Stop (O) button.
(b) Positioning operation
Positioning operation can be performed without using the servo system controller. Use this operation with the forced stop reset. This operation may be used independently of whether the servo is on or off and whether the servo system controller is connected or not.
Exercise control on the positioning operation screen of the servo configuration software.
1) Operation pattern
Item | Initial value | Setting range |
|
|
|
Travel [pulse] | 100000 | 0 to 9999999 |
Speed [r/min] | 200 | 0 to max. speed |
Acceleration/deceleration time constant [ms] | 1000 | 1 to 50000 |
2) Operation method
Operation
Forward rotation start
Reverse rotation start
Pause
Screen control
Press Forward (G) button.
Press Reverse (R) button.
Press Pause (O) button.
4 - 6
