Bose MR-J2S- B instruction manual Connection, Instructions for the 3M connector

3. SIGNALS AND WIRING

(2)Connection

Insert the core of the cable into the opening and tighten the screw with a flat-blade screwdriver so that the cable does not come off. (Tightening torque: 0.5 to 0.6N m) Before inserting the cable into the opening, make sure that the screw of the terminal is fully loose.

When using a cable of 1.5mm2 or less, two cables may be inserted into one opening.

Flat-blade screwdriver

Tip thickness 0.4 to 0.6mm

Overall width 2.5 to 3.5mm

To loosen. To tighten.

Cable

Opening

Control circuit terminal block

3.10 Instructions for the 3M connector

When fabricating an encoder cable or the like, securely connect the shielded external conductor of the cable to the ground plate as shown in this section and fix it to the connector shell.

External	conductor
		Sheath		Core			Sheath
					External	conductor
	Strip the sheath.		Pull back the external conductor to cover the sheath

Screw

Cable

Screw

Ground plate

3 - 24