Bose MR-J2S- B Battery installation procedure, Absolute Position Detection System, Point, 13

13. ABSOLUTE POSITION DETECTION SYSTEM

13.3 Battery installation procedure

Before starting battery installation procedure, make sure that the charge lamp is off WARNING more than 10 minutes after power-off. Then, confirm that the voltage is safe in the

tester or the like. Otherwise, you may get an electric shock.

POINT

The internal circuits of the servo amplifier may be damaged by static electricity. Always take the following precautions:

Ground human body and work bench.

Do not touch the conductive areas, such as connector pins and electrical parts, directly by hand.

1)Open the operation window. (When the model used is the MR-J2S-200B MR-J2S-350B, also remove the front cover.)

2)Install the battery in the battery holder.

3)Install the battery connector into CON1 until it clicks.

Battery connector

Operation window Battery connector

CON1

CON1

			Battery
				Battery holder
Battery	Battery holder
	For MR-J2S-200B or less		For MR-J2S-200B MR-J2S-350B
		Battery connector
		CON1

Battery holder Battery

For MR-J2S-500B MR-J2S-700B

13 - 3