Chapter 2 Installing and Removing Power Components

How to Install or Remove Modular Configuration Power Components

Installing a Modular Configuration Power Shelf

This section describes how to install a modular configuration power shelf.

The modular configuration power shelf is installed into the front of the chassis. Although there are differences between the different power shelf types (AC and DC), they are installed in the same manner.

Note If you have a fixed configuration PDU installed and before you can install a modular configuration power shelf, you must remove the fixed configuration PDU. See “Converting a Chassis from Fixed Configuration Power to Modular Configuration Power” section on page 2-54for more information.

Figure 2-14shows the front view of the modular configuration AC power shelf.

Figure 2-14 Modular Configuration AC Power Shelf, Front View

207660

Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Installation Guide

2-26

OL-6256-17

 

 

Page 58
Image 58
Cisco Systems OL-6256-17 Installing a Modular Configuration Power Shelf, Modular Configuration AC Power Shelf, Front View