Cisco Systems OL-6256-17 manual Nut/bolt to remove Mm wrench

Chapter 2 Installing and Removing Power Components

How to Install or Remove Modular Configuration Power Components

Figure 2-38 Securing Power Supplies to Cross Bracket to Rear Mounting Brackets

2 2 2 2 2 2 2 2

1 1 1 1

208425

1Power shelf mounting screws, two slotted screws per shelf

2M6 Hex head bolts to secure power shelf, four per shelf

Step 5 Using a 10-mm wrench on the bolt side and a 10-mm wrench on the nut side, remove the nut and bolt that secure the cross bracket to the chassis. See Figure 2-39. Remove the cross bracket from the mounting studs.

Figure 2-39 Removing Cross Bracket Nut and Bolt

1

2 3

208429

1

Nut/bolt to remove

2

10-mm wrench

3

10-mm wrench

Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Installation Guide

2-50 OL-6256-17