Cisco Systems OL-6256-17 manual Information About Small Form-Factor Pluggable SFP Modules

Contents

	Removing the Chassis Air Filter 3-11
	Prerequisites		3-11
	Required Tools and Equipment				3-11
	Steps	3-11
	What to Do Next			3-11
	Installing a Power Module Air Filter				3-12
	Prerequisites		3-12
	Required Tools and Equipment				3-12
	Steps	3-13
	What to Do Next			3-13
	Removing a Power Module Air Filter				3-13
	Prerequisites		3-13
	Required Tools and Equipment				3-13
	Steps	3-14
	What to Do Next			3-14
	Installing and Removing Line Cards, PLIMs, and Associated Components
C H A P T E R 4						4-1
	Information About Installing and Removing Cards and Associated Components					4-1
	Guidelines and Warnings for Card Installation and Removal 4-2
	Chassis Slot Numbers			4-4
	Recommended Order of Card Installation 4-5
	Cautions and Recommendations				4-5
	Information About Impedance Carriers and Slot Covers 4-6

Information About Distributed Route Processors and Distributed Route Processor PLIMs 4-10

Information About Small Form-Factor Pluggable (SFP) Modules 4-12

Information About Hard Drives and PCMCIA Cards					4-12
Information About Cable Management Brackets					4-12
How to Install or Remove a Slot Cover				4-13
Installing a Slot Cover			4-13
Prerequisites		4-14
Required Tools and Equipment				4-14
Steps	4-14
What to Do Next			4-15
Removing a Slot Cover			4-15
Prerequisites		4-16
Required Tools and Equipment				4-16
Steps	4-16
What to Do Next			4-16
How to Install or Remove an Impedance Carrier 4-16
		Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Installation Guide
OL-6256-17						vii