Cisco Systems OL-6256-17 manual Attaching Rear Mounting Brackets

Chapter 2 Installing and Removing Power Components

How to Install or Remove Modular Configuration Power Components

Figure 2-20 Attaching Rear Mounting Brackets

279999

1 2

1

Bolts to secure bracket to chassis

2

Wrench to tighten bolts

Step 6 Remove the ESD-preventive wrist strap from the rear (MSC) side of the chassis. Go to the front of the chassis and reattach to one of the ESD connection sockets on the front (PLIM) side of the chassis or a bare metal surface on the chassis.

Step 7 Insert the modular configuration power shelf so that it stops against the rear mounting bracket, then fasten the power shelf to the chassis. (There are two screws per shelf, see Figure 2-21).

Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Installation Guide

OL-6256-17 2-31