HP 30 30 manual FU1-30 ~ FU1-37 User V/F Frequency and Voltage, 15.00

Chapter 6 - Parameter description [FU1]

Output Voltage

100%

Output

Frequency

Freq. Base

[V/F Pattern: ‘Square’]

Output Voltage

100%
FU1-37
FU1-35
FU1-33
FU1-31		Output
FU1-30	FU1-36	Frequency
FU1-32	FU1-34	Freq. Base
	[V/F Pattern: ‘User V/F’]

FU1-30 ~ FU1-37: User V/F Frequency and Voltage

FU1► User freq 1				30	15.00
30	15.00 Hz
Factory Default:		15.00 Hz			15.00
FU1► User volt 1				31	25
31		25 %
Factory Default:		25 %			25
			□
			□
			□
FU1► User freq 4				36	15.00
36	60.00 Hz
Factory Default:		60.00 Hz			15.00
FU1► User volt 4				37	100
37		100 %
Factory Default:		100 %			100

These functions are available only when ‘User V/F’ is selected in FU1-29 [V/F pattern]. Users can make the custom V/F pattern by setting four points between FU1-22 [Starting Frequency] and FU1-21 [Base Frequency].

Output Voltage

100%
FU1-37
FU1-35
FU1-33
FU1-31		Output
FU1-30	FU1-36	Frequency
FU1-32	FU1-34	Freq. Base
	[User V/F]

☞Note: When the ‘User V/F’ is selected, the torque boost of FU1-26 through FU1-28 is ignored.

6-16