HP 30 30 manual 230V Class 1 ~ 30HP, 460V Class 1 ~ 30HP

USER SELECTION GUIDE (ACtionMaster SPECIFICATIONS)

230V Class (1 ~ 30HP)

	Model Number			008			015		022	037		055			075		110			150			185	220
SV xxx ACtionMaster - 2
Motor		HP	1			2		3		5	7.5			10		15			20			25		30
Rating1		kW	0.75			1.5		2.2		3.7	5.5			7.5		11			15			18.5		22
		Capacity2 [kVA]	1.9			3.0		4.5		6.1	9.1			12.2		17.5			22.9			28.2		33.5
Output		FLA [A]	5			8		12		16	24			32		46			60			74		88
Ratings		Frequency	0 ~ 400 Hz (0-120Hz for Vector control)
		Voltage		200 ~ 230 V 3
Input		Voltage		3 Phase, 200 ~ 230 V (± 10 %)
Ratings		Frequency		50 ~ 60 Hz (±5 %)
		Braking Circuit		On the Board					On the Board			On the Board					Optional (Braking Unit, Resistor) 4
												(Optional Resistor)
Dynamic		Average Braking			100%			100%					150%								150%
		Torque
Braking4
		Max. Continuous		5 seconds					5 seconds			15 seconds						Controlled by Braking Unit 5
		Baking Time
		Max. Duty		3 % ED					2 % ED			5 % ED								5 % ED
	Weight [lbs]		10.1			10.1		10.6		10.8	16.5			17.0		30.4			31.5			42.8		44.1

460V Class (1 ~ 30HP)

	Model Number			008	015		022	037		055			075		110		150			185		220
SV xxx ACtionMaster - 4
Motor		HP	1		2	3		5	7.5			10		15		20			25		30
Rating1		kW	0.75		1.5	2.2		3.7	5.5			7.5		11		15			18.5		22
		Capacity2 [kVA]	1.9		3.0	4.5		6.1	9.1			12.2		18.3		22.9			29.7		34.3
Output		FLA [A]	2.5		4	6		8	12			16		24		30			39		45
Ratings		Frequency	0 ~ 400 Hz (0-120Hz for Vector control)
		Voltage		380 ~ 460 V 3
Input		Voltage		3 Phase, 380 ~ 460 V (± 10 %)
Ratings		Frequency		50 ~ 60 Hz (±5 %)
Dynamic		Braking Circuit		On the Board			On the Board			On the Board					Optional (Braking Unit, Resistor) 4
Braking4										(Optional Resistor)
		Max. Braking Torque	100%			100%					150%							150%

1Indicates the maximum applicable capacity when using a 4 Pole motor.

2Rated capacity (√ 3*V*I) is based on 220V for 200V class and 440V for 400V class.

3Maximum output voltage will not be greater than the input voltage. Output voltage less than the input voltage may be programmed.

41~5 HP inverters have internal braking resistors as standard. 7.5~10 HP inverters utilize optional braking resistors.

i