HP 30 30 manual FU2-69 Accel/Decel Change Frequency, FU2-70 Reference Frequency for Accel/Decel

Chapter 6 - Parameter Description [FU2]

FU2-69: Accel/Decel Change Frequency

FU2►Acc/Dec ch F		69	0
69	0.00 Hz
Factory Default:	0.00 Hz		0

This function is used to change Accel/Decel ramp at a certain frequency. This is useful in textile machine application.

☞Note: If the multi-function input terminal (I/O-12 ~ I/O-14) is set to ‘XCEL-L’, XCEL-M’, or XCEL-H’, The Multi- Accel/Decel Time (I/O-25 ~ I/O-38) has the priority.

Max. Frequency	Accel/Decel
Output Frequency	Change
	Frequency

DRV-01	[AccTime]	DRV-02 [DecTime]
I/O-25	[Acc Time1]	I/O-26 [Dec Time1]

FX

[Accel/Decel Change Operation]

FU2-70: Reference Frequency for Accel/Decel

FU2►Acc/Dec freq			70	0
70	Max freq
Factory Default:		Max freq		0

This is the reference frequency for acceleration and deceleration. If a decided Accel/Decel time from a frequency to a target frequency is required, set this value to ‘Delta freq’.

Setting Range		Description
LCD	7-Seg
Max freq		The Accel/Decel time is the time that
	0	takes to reach the maximum
		frequency from 0 Hz.

		The Accel/Decel time is the time that
Delta freq	1	takes to reach a target frequency
		from a frequency (currently operating
		frequency).
Related Functions: DRV-01, DRV-02 [Accel/Decel Time]
	FU2-71 [Accel/Decel Time Scale]
	I/O-25 ~ I/O-38 [1st ~ 7th Accel/Decel Time]

FU2-71: Accel/Decel Time Scale

FU2►	Time scale		71	0.1
71	0.1 sec
Factory Default:		0.1 sec		0.1

This is used to change the time scale.

Related Functions: DRV-01, DRV-02 [Accel/Decel Time]

			FU2-70 [Reference Freq. for Accel/Decel]
			I/O-25 ~ I/O-38 [1st ~ 7th Accel/Decel Time]
		Setting Range			Description
		LCD	7-Seg
		0.01 sec		The Accel/Decel time is changed by 0.01
			0	second. The maximum setting range is
				600 seconds.
		0.1 sec		The Accel/Decel time is changed by 0.1
			1	second. The maximum setting range is
				6000 seconds.
		1 sec		The Accel/Decel time is changed by 1
			2	second. The maximum setting range is
				60000 seconds.
		FU2-72: Power On Display
	FU2►PowerOn disp				72	0
72				0
	Factory Default:		0			0

This code selects the parameter to be displayed first on keypad (DRV-00) when the power is turned on.

Setting		Description
Range
0	DRV-00	[Command Frequency]
1	DRV-01	[Acceleration Time]
2	DRV-02	[Deceleration Time]
3	DRV-03	[Drive Mode]

6-30