HP 30 30 manual Rst Axa

Chapter 4 - Operation Examples

Operation Example (4)

Sensorless_S Control + Multi-speed operation + Analog output (FM)

[Operation condition]

-. Control mode : Sensorless Speed control

-. Frequency command : Multi-function input from SUB-Aand 8 step speed operation (Multi-speed 7 + jog freq 1)

-. Accel time : 5 [Sec], Decel time: 5 [Sec]

-. Drive mode : Run/Stop and speed output via terminal FX/RX

[Wiring]

Output freq [Hz]

	SPD 0 SPD 1 SPD 2			SPD 3 SPD	4 SPD 5 SPD			6 SPD 7		JOG
P4
		ON		ON		ON			ON
P5
			ON					ON
P6
						ON
JOG										ON
FX
		ON
RX
							ON
		Multi-speed freq setting range
		DRV-00	Speed 0			I/O-20		Speed 4
		DRV-05		Speed 1		I/O-21		Speed 5
		DRV-06		Speed 2		I/O-22		Speed 6
		DRV-07		Speed 3		I/O-23		Speed 7

B1	B2
R	U		IM
S	V
T	W		Output
G
	FM	FM	freq meter
S/W	5G		0 -10 V,
			Pulse
FX	30A
RX
	30C
BX	30B
RST	AXA	Sub - A	S/W
JOG	AXC
P1		P4
P2
	CN5	P5
P3
		P6
CM		CM

Step	Parameter setting	Code	Description
1	Control Mode Selection	FU2-39	Set it to Sensorless_S.
2	Drive mode	DRV-3	Set it to FX/RX-1.
3	Multi-function input	EXT-2 ~ 4	Set P3, P4, P5 to Speed-L, Speed-M, Speed-H.
	FM
4	(Frequency Meter) Output	I/O-40	Set it to Frequency output
	Selection
5	FM Output Adjustment	I/O-41	Output V = 10V x output freq x output gain (ex100%) /
			( Max freq x 100 )
			Motor runs in forward direction at the set freq via P3, 4, 5 if Fx terminal is
6	Terminal FX		ON.
			Motor decelerates to stop with Decel time 5 [sec] if FX terminal is OFF.
			Motor runs in reverse direction at the set freq via P3, 4, 5 if RX terminal is
7	Terminal RX		ON.
			Motor decelerates to stop with Decel time 5 [sec] if RX terminal is OFF.

4-12