HP 30 30 manual Iii

		Jog		Jog Operation
		Auto Operation		Operates via Internal Sequence by Setting Multi-Function Terminal (5 Way * 8 Step)
		Fault Reset		Trip Status is Removed when Protection Function is Activated
		Operating Status		Frequency Detection Level, Overload Alarm, Stalling, Over Voltage, Under Voltage, Inverter
	Sig.			Overheating, Running, Stop, Constant Speed, Inverter By-Pass, Speed Searching, Auto-Operation
				Step, Auto-Operation Sequence
	Output
		Fault Output		Contact Output (30A, 30C, 30B) – AC 250V 1A, DC 30V 1A
		Indicator(FM,LM)		Choose 1 from Output Frequency, Output Current, Output Voltage, DC Voltage, Output Torque
				Output Voltage: 0 ~ 10V (for FM: Linear output, 15V Max., LM), Pulse output: 500Hz (for LM).
	Operation Function			DC Braking, Frequency Limit, Frequency Jump, Second Function, Slip Compensation, Reverse
				Rotation Prevention, Auto Restart, Inverter By-Pass, Auto-Tuning, PID Control
Function	Inverter Trip			Over Voltage, Under Voltage, Over Current, Fuse Open, Ground Fault, Inverter Overheating, Motor
				Overheating, Output Phase Open,
				Overload Protection, External Fault 1, 2, Communication Error, Loss of Speed Command, Hardware
				Fault, Option Fault etc.
Protective
	Inverter Alarm			Stall Prevention, Overload Alarm, Temperature Sensor Fault
	Momentary Power Loss			Less than 15msec: Continuous Operation,
				More than 15msec: Auto Restart Possible
Display			Operation	Output Frequency, Output Current, Output Voltage, Frequency Value Setting, Operating Speed, DC
	Keypad		Information	Voltage, Output Torque
			Trip	Indicates a Fault when the Protection Function activates, Retains Up to 5 Faults
			Information
	Ambient Temperature			-10°C ~ 40 °C (14 °F ~ 104 °F), CE Certification: 41 °F ~ 104 °F (5 °C ~ 40 °C)
Environment	Storage Temperature			-20 °C ~ 65 °C (-4 °F ~ 149 °F)
	Ambient Humidity			Less Than 90 % RH Max. (Non-Condensing), CE Certification: 5 ~85% (Non-Condensing)
	Altitude - Vibration			Below 1,000m or 3,300ft above sea level · Below 5.9m/sec2 (=0.6g)
	Air Pressure			86 ~ 106kPa
	Application Site			No Corrosive Gas, Combustible Gas, Oil Mist, or Dust
Cooling Method				Forced Air Cooling

iii