Chapter 2 - Operation

2.2 LCD Keypad

LCD keypad can display up to 32 alphanumeric characters, and various settings can be checked directly from the display. The following is an illustration of the keypad.

32 character, back light, LCD display. The back light is adjustable.

The Mode Button moves you through the seven program groups: DRV, FUN1, FUN2, I/O, (EXT), COM, and APP

The Up and Down

Arrows are used to move through and change data.

Reverse Run Button. The Reverse Run LED blinks when the drive Accels or Decels.

The Program Button is used to go into programming mode to change data.

The Enter Button is used to enter changed data within a parameter.

[SHIFT] This button is used to move cursor across display in programming mode. [ESC] This button is used to move the program code to DRV 00 form any program code.

Forward Run Button. The Forward Run LED blinks when the drive Accels or Decels.

Stop Button is used to stop the drive from running.

The Reset Button is used to reset Faults. The LED blinks when there is a fault.

2-2

Page 30
Image 30
HP 30 30 manual LCD Keypad, Operation