Use an
Before operating unit and prior to user programming, reset user parameters to default settings.
Inverter can easily be set to
Stopping torque is not produced when using the
(5)Fault prevention precautions
Provide a safety backup such as an emergency brake which will prevent the machine and equipment from hazardous conditions if the inverter fails.
(6)Maintenance, inspection and parts replacement
Do not conduct a megger (insulation resistance) test on the control circuit of the inverter.
Refer to Chapter 8 for periodic inspection (parts replacement).
(7)Disposal
Handle the inverter as an industrial waste when disposing of it.
(8)General instructions
Many of the diagrams and drawings in this instruction manual show the inverter without a circuit breaker, a cover or partially open. Never run the inverter like this. Always place the cover with circuit breakers and follow this instruction manual when operating the inverter.