HP 30 30 manual External Group EXT

Chapter 5 - Parameter List

Code	Description	Keypad Display			Setting Range			Units	Factory	Adj.	Page
		LCD		7-Segment	LCD	7-Segment			Default	During
										Run
I/O-58	Transient Time to 1st Step	Seq1 / 2T	58		0.1 to 6000 [sec]			0.1	1.1 [sec]	Yes
	of Sequence 2
I/O-59	Steady Speed Time at 1st	Seq1 / 2S	59		0.1 to 6000 [sec]			0.1	1.1 [sec]	Yes	6-2
	Step of Sequence 2
I/O-60	Motor Direction of 1st Step	Seq1 / 2D	60		Reverse		0	-	Forward	Yes
	of Sequence 2				Forward		1
		Not				[PROG/ENT]
I/O-99	Return Code		99		Not available		or	-	1	Yes
		displayed
						[SHIFT/ESC]

5.5 External Group [EXT]

EXT group appears only when the corresponding Sub-Board is installed.

Code	Description	Keypad Display			Setting Range			Units	Factory	Adj.	Page
		LCD		7-Segment	LCD		7-Segment		Default	During
										Run
EXT-00	Jump to Desired Code #	Jump code		Not displayed	0 to 99		Not available	1	1	Yes	6-2
					None	0
					SUB-A	1
					SUB-B	2
					SUB-C	3				Automa
EXT-01	Sub Board Type Display	Sub B/D	01		SUB-D	4		-	None	tically	6-2
					SUB-E	5				set
					SUB-F	6
					SUB-G	7
					SUB-H	8
EXT-02	Multi-Function Input	P4 define	02		Speed-L	0		-	XCEL-L	Yes	6-2
	Terminal ‘P4’ Define				Speed-M	1
					Speed-H	2
					XCEL-L	3
					XCEL-M	4
					XCEL-H	5
					Dc-brake	6
					2nd Func	7
					Exchange	8
					- Reserved -	9
					Up	10
					Down	11
					3-Wire	12
					Ext Trip-A	13
					Ext Trip-B	14
					iTerm Clear	15
					Open-loop	16

5-14