Kerio Tech Firewall6 Remote Administration and Update Checks, Setting Remote Administration, 209

Models: Firewall6

1 398
Download 398 pages 11.9 Kb
Page 209
Image 209

Chapter 14

Remote Administration and Update Checks

14.1 Setting Remote Administration

Remote administration can be either permitted or denied by definition of the appropriate traffic rule. Traffic between WinRoute and Administration Console is performed by TCP and UDP protocols over port 44333. The definition can be done with the predefined service KWF Admin.

If WinRoute includes only traffic rules generated by the wizard, remote administration is available through all interfaces except the one which is used for Internet connection and where NAT is enabled (see chapter 6.1). This means that remote administration is available from all local hosts.

How to allow remote administration from the Internet

In the following example we will demonstrate how to allow WinRoute remote adminis- tration from some Internet IP addresses.

Source — group of IP addresses from which remote administration will be allowed.

For security reasons it is not recommended to allow remote administration from an arbitrary host within the Internet (this means: do not set Source as the Web interface).

Destination Firewall (host where WinRoute is running)

Service KWF Admin (predefined service— WinRoute administration)

Action Permit (otherwise remote administration would be blocked)

Translation — Because the engine is running on the firewall there is no need for translation.

Figure 14.1 Traffic rule that allows remote administration

209

Page 209
Image 209
Kerio Tech Firewall6 manual Remote Administration and Update Checks, Setting Remote Administration, 209