![](/images/new-backgrounds/1300220/300220443x1.webp)
Chapter 16
Other settings
16.1 Routing table
Using Administration Console you can view or edit the system routing table of the host where WinRoute is running. This can be useful especially to resolve routing problems remotely (it is not necessary to use applications for terminal access, remote desktop, etc.).
To view or modify the routing table go to Configuration → Routing Table. This section provides
Figure 16.1 Firewall’s system routing table
Dynamic and static routes can be added/removed in this section. Dynamic routes are valid only until the operating system is restarted or until removed by the route system command. Static routes are saved in WinRoute and they are restored upon each restart of the operating system.
Warning: Changes in the routing table might interrupt the connection between the WinRoute Firewall Engine and the Administration Console. We recommend to check the routing table thoroughly before clicking the Apply button!
222