Kerio Tech Firewall6 manual Glossary of terms IP address, IPSec, Kerberos, 388

Models: Firewall6

1 398
Download 398 pages 11.9 Kb
Page 388
Image 388

Glossary of terms

IP address

IP address is a unique 32-bit number used to identify the host in the Internet. It is specified by numbers of the decimal system (0-255) separated by dots (e.g. 195.129.33.1). Each packet contains information about where it was sent from (source IP address) and to which address it is to be delivered (destination IP ad- dress).

IPSec

IPsec (IP Security Protocol) is an extended IP protocol which enables secure data transfer. It provides services similar to SSL/TLS, however, these services are pro- vided on a network layer. IPSec can be used for creation of encrypted tunnels be- tween networks (VPN) — so called tunnel mode, or for encryption of traffic between two hosts— so called transport mode.

Kerberos

Kerberos is a system used for secure user authentication in network environments. It was developed at the MIT university and it is a standard protocol used for user authentication under Windows 2000/2003. Users connect to central servers ( Key Distribution Center — KDC) and the servers send them encrypted keys (so called tickets) for connection to other servers within the network. In case of the Windows 2000/2003 domains, function of KDC is provided by the particular domain server.

LDAP

LDAP (Lightweight Directory Access Protocol) is an Internet protocol used to access directory services. Information about user accounts and user rights, about hosts included in the network, etc. are stored in the directories.

NAT

NAT (Network Address Translation ) stands for substitution of IP addresses in pack- ets passing through the firewall:

source address translation (Source NAT, SNAT ) — in packets going from local networks to the Internet source (private) IP addresses are substituted with the external (public) firewall address. Each packet sent from the local network is recorded in the NAT table. If any packet incoming from the Internet matches with a record included in this table, its destination IP address will be substituted by the IP address of the appropriate host within the local network and the packet will be redirected to this host. Packets that do not match with any record in the NAT table will be dropped.

destination address translation (Destination NAT, DNAT , it is also called port mapping) — is used to enable services in the local network from the Internet. If any packet incoming from the Internet meets certain requirements, its IP address will be substituted by the IP address of the local host where the service is running and the packet is sent to this host.

388

Page 388
Image 388
Kerio Tech Firewall6 manual Glossary of terms IP address, IPSec, Kerberos, 388