If you have other devices to install or remove, do so now. Otherwise, go to “Completing the installation” on page 233.
Removing the DVD drive
To remove the DVD drive | , do the following: |
1.Read the safety information that begins on page 5.
2.Turn off the server and peripheral devices, and disconnect the power cords and all external cables.
3.Unlock and remove the
4.Disconnect the DVD drive cables from the back of the DVD drive.
5.Open the bezel (see “Opening the bezel” on page 150).
6.Grasping the blue tabs on each side of the DVD drive, press them inward while you pull the drive out of the sever.
7.Remove the rails from the DVD drive and save them for future use.
8.If you are instructed to return the DVD drive, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
Chapter 7. Installing optional devices and replacing customer replaceable units 187
