Lenovo 3719, 3821, 3822, 3823 manual Software, Features and specifications

Table 1. Features and specifications

Microprocessor:

vIntel Xeon dual-core or quad-core with integrated memory controller and Quick Path Interconnect (QPI) architecture

vDesigned for LGA 1366 socket

vScalable up to four cores

v32 KB instruction cache, 32 KB data cache, and 8 MB cache that is shared among the cores

vSupport for up to two microprocessors, second microprocessor with pluggable VRM

vSupport for Intel Extended Memory 64 Technology (EM64T)

Note: Use the Setup Utility to determine the type and speed of the microprocessors. For a list of supported microprocessors, see http://www.lenovo.com/thinkserver and click

Options.

Memory:

v16 DIMM connectors (eight per microprocessor)

vMinimum: 2 GB DIMM per microprocessor

vMaximum: 64 GB

vType: Registered ECC DDR3 800, 1066, and 1333 MHz DIMMs only

vSizes: 1 GB single-rank, 2 GB single-rank or dual-rank, 4 GB dual-rank (PC3-10600R-999)

Drives:

vSATA:

–DVD (standard)

–DVD/CD-RW (optional)

–Maximum of two devices can be installed

vDiskette (optional): External USB 1.44 MB

vSupported hard disk drives:

–Serial Attached SCSI (SAS)

Expansion bays:

v16 hot-swap SAS 2.5-inch bays

vThree half-high 5.25-inch bays (one DVD drive installed)

Note: Full-high devices such as an optional tape drive will occupy two half-high 5.25-inch bays.

PCI and PCI-X expansion slots:

vSix PCI expansion slots on system board

–Two PCI Express x8 (x4 link)

–Two PCI Express x8 (x8 link)

–One PCI Express x16 (x8 link)

–One PCI 32-bit

vOne PCI Express x8 (x4 link) on the extender card

Power supply:

Note: To upgrade to two 920-watt hot-swap power supplies, install the redundant power and cooling option kit. Kit includes one hot-swap

920-watt power-supply and three hot-swap fans.

vStandard: One 920-watt 110 V or 240 V ac input dual-rated power supply

vUpgradeable to two 920-watt hot-swap power supplies

Hot-swap fans:

vThree (standard)

vUpgradeable to six fans (for redundant cooling)

Note: To upgrade to redundant cooling, install the redundant power and cooling option kit. Kit includes one 920-watt hot-swap power-supply and three hot-swap fans.

Size:

vTower

–Height: 440 mm (17.3 inches)

–Depth: 767 mm (30.2 inches)

–Width: 218 mm (8.6 inches)

–Weight: approximately 38 kg (84 lb.) when fully configured or 20 kg (42 lb.) minimum

Integrated functions:

vIntegrated management module (IMM), which provides service processor control and monitoring functions, video controller, remote keyboard, video, mouse, and remote hard disk drive capabilities

vDedicated or shared management network connections

vSix-port Serial ATA (SATA) controller

vSerial over LAN (SOL) and serial redirection over Telnet or Secure Shell (SSH)

vSupport for remote management presence

vOne systems-management RJ-45 for connection to a dedicated systems-management network

vEasyLED diagnostics

vSix Universal Serial Bus (USB) ports standard (v2.0 supporting v1.1)

–Four on rear of server

–Two on front of server

vOne internal USB tape connector

vOne Broadcom dual-port 10/100/1000 Ethernet controller with Wake on LAN support and TCP/IP Offload Engine (TOE) support

vOne serial connector, shared with the IMM

Note: In messages and documentation, the term service processor refers to the integrated management module (IMM).

Video controller:

vMatrox G200 video on system board

vCompatible with SVGA and VGA

v8 MB DDR2 SDRAM video memory Note: Maximum video resolution 1600 x 1200 at 85 MHz

RAID controllers:

vServeRAID-BR10i SAS/SATA Controller that supports RAID levels 0, 1, 1E (standard)

vUpgradeable to ServeRAID-MR10i SAS/SATA Controller, which supports RAID levels 0, 1, 5, 6, 10

vUpgradeable to ServeRAID-MR10is SAS/SATA Controller, which supports RAID levels 0, 1, 5, 6, 10

Acoustical noise emissions:

vSound power, idle: 5.5 bel declared

vSound power, operating: 6.0 bel declared

Environment:

vAir temperature:

–Server on: 10° to 35° C (50.0° to 95.0° F);

altitude: 0 to 914.4 m (3000 ft.)

–Server off: -40° to 60° C (-40.0° to 140.4° F);

maximum altitude: 2133.6 m (7000 ft.)

vHumidity:

–Server on: 8% to 80%

–Server off: 8% to 80%

Heat output:

Approximate heat output in British thermal units (Btu) per hour:

vMinimum configuration: 2013 Btu per hour (590 watts)

vMaximum configuration: 3610 Btu per hour (1058 watts)

Electrical input:

vSine-wave input (50-60 Hz) required

vInput voltage low range:

–Minimum: 100 V ac

–Maximum: 127 V ac

vInput voltage high range:

–Minimum: 200 V ac

–Maximum: 240 V ac

vApproximate input kilovolt-amperes (kVA):

–Minimum: 0.60 kVA

–Maximum: 1.10 kVA

Notes:

1.Power consumption and heat output vary depending on the number and type of optional features that are installed and the power-management optional features that are in use.

2.These levels were measured in controlled acoustical environments according to the procedures that are specified by the American National Standards Institute (ANSI) S12.10 and ISO 7779 and are reported in accordance with ISO 9296. Actual sound-pressure levels in a given location might exceed the average stated values because of room reflections and other nearby noise sources. The declared sound-power levels indicate an upper limit, below which a large number of computers will operate.

Software

Lenovo provides software to help get your server up and running.

18ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Hardware Maintenance Manual