Lenovo 3823, 3821, 3822, 3719 manual ID or password

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 8, “Parts Listing, TD200x Machine Types 3719, 3821, 3822, and 3823,” on page 237 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

Attempting to %1 server %2 by user	Info	A user has used the IMM to	No action; information only.
%3.		perform a power function on
(%1 = Power Up, Power Down,		the server.
Power Cycle, or Reset; %2 =
Lenovo_ComputerSystem.
ElementName; %3 = user ID)
Security: Userid: '%1' had %2 login	Error	A user has exceeded the	1. Make sure that the correct
failures from WEB client at IP		maximum number of
				login ID and password are
address %3.		unsuccessful login attempts
				being used.
(%1 = user ID; %2 =		from a Web browser and has
			2.	Have the system
MaximumSuccessiveLoginFailures		been prevented from logging
(currently set to 5 in the firmware);		in for the lockout period.		administrator reset the login
				ID or password.
%3 = IP address, xxx.xxx.xxx.xxx)
Security: Login ID: '%1' had %2 login	Error	A user has exceeded the	1. Make sure that the correct
failures from CLI at %3.		maximum number of
				login ID and password are
(%1 = user ID; %2 =		unsuccessful login attempts
				being used.
MaximumSuccessiveLoginFailures		from the command-line
			2.	Have the system
(currently set to 5 in the firmware);		interface and has been
				administrator reset the login
%3 = IP address, xxx.xxx.xxx.xxx)		prevented from logging in for
				ID or password.
		the lockout period.
Remote access attempt failed. Invalid	Error	A user has attempted to log	1. Make sure that the correct
userid or password received. Userid		in from a Web browser by
				login ID and password are
is '%1' from WEB browser at IP		using an invalid login ID or
				being used.
address %2.		password.
			2.	Have the system
(%1 = user ID; %2 = IP address,
				administrator reset the login
xxx.xxx.xxx.xxx)
				ID or password.
Remote access attempt failed. Invalid	Error	A user has attempted to log	1. Make sure that the correct
userid or password received. Userid		in from a Telnet session by
				login ID and password are
is '%1' from TELNET client at IP		using an invalid login ID or
				being used.
address %2.		password.
			2.	Have the system
(%1 = user ID; %2 = IP address,
				administrator reset the login
xxx.xxx.xxx.xxx)
				ID or password.
The Chassis Event Log (CEL) on	Info	A user has cleared the IMM	No action; information only.
system %1 cleared by user %2.		event log.
(%1 = CIM_ComputerSystem.
ElementName; %2 = user ID)
IMM reset was initiated by user %1.	Info	A user has initiated a reset	No action; information only.
(%1 = user ID)		of the IMM.

Chapter 5. Diagnostics 59