Lenovo 3823, 3821, 3822, 3719 manual Diagnostics

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 8, “Parts Listing, TD200x Machine Types 3719, 3821, 3822, and 3823,” on page 237 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

Error code	Description	Action
3048006	Booted secondary (backup) server firmware	1.	Run the Setup utility, select Load Default
	image because of ABR
			Settings, and save the settings to recover the
			primary server firmware settings.
		2.	Turn off the server and remove it from the power
			source.
		3.	Reconnect the server to the power source, and
			then turn on the server.
305000A	RTC date/time is incorrect	1.	Adjust the date and time settings in the Setup
			utility, and then restart the server.
		2.	Reseat the battery.
		3.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time:
			a.	Battery
			b. (Trained service technician only) System
				board
3058001	System configuration invalid	1.	Run the Setup utility, and select Save Settings.
		2.	Run the Setup utility, select Load Default
			Settings, and save the settings.
		3.	Reseat the following components one at a time in
			the order shown, restarting the server each time:
			a.	Battery
			b. Failing device (if the device is a FRU, it must
				be reseated by a trained service technician
				only)
		4.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time:
			a.	Battery
			b. Failing device (if the device is a FRU, it must
				be replaced by a trained service technician
				only)
			c. (Trained service technician only) System
				board

Chapter 5. Diagnostics 35