![](/images/new-backgrounds/1102911/102911135x1.webp)
vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
vSee Chapter 8, “Parts Listing, TD200x Machine Types 3719, 3821, 3822, and 3823,” on page 237 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).
vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.
ENET[0] | Info | The DHCP server has | No action; information only. |
IP@=%3, SN=%4, GW@=%5, |
| assigned an IMM IP address |
|
DNS1@=%6. |
| and configuration. |
|
(%1 = CIM_DNSProtocolEndpoint. |
|
|
|
Hostname; %2 = |
|
|
|
CIM_DNSProtocolEndpoint. |
|
|
|
DomainName; %3 = |
|
|
|
CIM_IPProtocolEndpoint. |
|
|
|
IPv4Address; %4 = |
|
|
|
CIM_IPProtocolEndpoint. |
|
|
|
SubnetMask; %5 = IP address, |
|
|
|
xxx.xxx.xxx.xxx; %6 = IP address, |
|
|
|
xxx.xxx.xxx.xxx) |
|
|
|
|
|
|
|
ENET[0] | Info | An IMM IP address and | No action; information only. |
IP@%2, NetMsk=%3, GW@=%4. |
| configuration have been |
|
(%1 = CIM_DNSProtocolEndpoint. |
| assigned using client data. |
|
Hostname; %2 = |
|
|
|
CIM_StaticIPSettingData. |
|
|
|
IPv4Address; %3 = |
|
|
|
CIM_StaticIPSettingData. |
|
|
|
SubnetMask; %4 = |
|
|
|
CIM_StaticIPSettingData. |
|
|
|
DefaultGatewayAddress) |
|
|
|
|
|
|
|
LAN: Ethernet[0] interface is no | Info | The IMM Ethernet interface | No action; information only. |
longer active. |
| has been disabled. |
|
|
|
|
|
LAN: Ethernet[0] interface is now | Info | The IMM Ethernet interface | No action; information only. |
active. |
| has been enabled. |
|
|
|
|
|
DHCP setting changed to by user | Info | A user has changed the | No action; information only. |
%1. |
| DHCP mode. |
|
(%1 = user ID) |
|
|
|
|
|
|
|
IMM: Configuration %1 restored from | Info | A user has restored the IMM | No action; information only. |
a configuration file by user %2. |
| configuration by importing a |
|
(%1 = CIM_ConfigurationData. |
| configuration file. |
|
ConfigurationName; %2 = user ID) |
|
|
|
|
|
|
|
Watchdog %1 Screen Capture | Error | An | 1. Reconfigure the watchdog |
Occurred. |
| has occurred, and the | |
| timer to a higher value. | ||
(%1 = OS Watchdog or Loader |
| screen capture was | |
| 2. Make sure that the IMM | ||
Watchdog) |
| successful. | |
| Ethernet over USB interface | ||
|
|
| |
|
|
| is enabled. |
|
|
| 3. Reinstall the RNDIS or |
|
|
| cdc_ether device driver for |
|
|
| the operating system. |
|
|
| 4. Disable the watchdog. |
|
|
| 5. Check the integrity of the |
|
|
| installed operating system. |
|
|
|
|
60ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Hardware Maintenance Manual