Lenovo 3822, 3821, 3719, 3823 manual Generate a New Key Certificate Signing Request link

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 8, “Parts Listing, TD200x Machine Types 3719, 3821, 3822, and 3823,” on page 237 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

Redundancy Bckup Mem Status has	Error	Redundancy has been lost	1. Check the system-event log
been reduced.		and is insufficient to continue
			for DIMM failure events
		operation.
			(uncorrectable or PFA) and
			correct the failures.
			2. Re-enable mirroring in the
			Setup utility.
IMM Network Initialization Complete.	Info	An IMM network has	No action; information only.
		completed initialization.
Certificate Authority %1 has detected	Error	A problem has occurred with	1. Make sure that the certificate
a %2 Certificate Error.		the SSL Server, SSL Client,	that you are importing is
(%1 = Lenovo_CertificateAuthority.		or SSL Trusted CA certificate
			correct.
CADistinguishedName;		that has been imported into
			2. Try importing the certificate
%2 = CIM_PublicKeyCertificate.		the IMM. The imported
			again.
ElementName)		certificate must contain a
		public key that corresponds
		to the key pair that was
		previously generated by the
		Generate a New Key and
		Certificate Signing
		Request link.
Ethernet Data Rate modified from %1	Info	A user has modified the	No action; information only.
to %2 by user %3.		Ethernet port data rate.
(%1 = CIM_EthernetPort.Speed;
%2 = CIM_EthernetPort.Speed;
%3 = user ID)
Ethernet Duplex setting modified	Info	A user has modified the	No action; information only.
from %1 to %2 by user %3.		Ethernet port duplex setting.
(%1 = CIM_EthernetPort.FullDuplex;
%2 = CIM_EthernetPort.FullDuplex;
%3 = user ID)
Ethernet MTU setting modified from	Info	A user has modified the	No action; information only.
%1 to %2 by user %3.		Ethernet port MTU setting.
(%1 = CIM_EthernetPort.
ActiveMaximumTransmissionUnit;
%2 = CIM_EthernetPort.
ActiveMaximumTransmissionUnit; %3
= user ID)
Ethernet Duplex setting modified	Info	A user has modified the	No action; information only.
from %1 to %2 by user %3.		Ethernet port MAC address
(%1 = CIM_EthernetPort.		setting.
NetworkAddresses;
%2 = CIM_EthernetPort.
NetworkAddresses;
%3 = user ID)
Ethernet interface %1 by user %2.	Info	A user has enabled or	No action; information only.
(%1 =		disabled the Ethernet
CIM_EthernetPort.EnabledState;		interface.
%2 = user ID)

Chapter 5. Diagnostics 57