Lenovo 3719, 3821, 3822, 3823 manual Removing the rear adapter retention bracket

Removing the rear adapter retention bracket

Rear adapter retention bracket

Hinge pin

To remove the rear adapter-retention bracket, do the following:

1.Read the safety information that begins on page 5.

2.Turn off the server and all attached devices; then, disconnect all power cords and external cables.

3.Unlock and remove the side cover (see “Removing the left-side cover” on page 157).

4.Remove all adapters and place the adapters on a static-protective surface (see “Removing an adapter” on page 184).

Note: You might find it helpful to note where each adapter is installed before removing the adapters.

5.Open the rear adapter retention bracket.

6.Press the rear adapter retention bracket and release the top hinge point; then, release the other hinge point and remove the bracket from the chassis.

7.If you are instructed to return the rear adapter-retention bracket, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

182ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Hardware Maintenance Manual