10.Remove any of the following components that are installed on the system board and put them in a safe,
vAdapters (see “Removing an adapter” on page 184).
vExtender card (see “Removing an extender card” on page 207).
vDIMMs (see “Removing a memory module” on page 210).
vMicroprocessors and heat sinks (see “Removing a microprocessor and heat sink” on page 218).
vBattery (see “Removing the battery” on page 172).
11.Rotate the release lever toward the front of the chassis.
12.Slide the system board toward the front of the server to disengage the tabs from the chassis; then, grasp the handles and carefully lift the system board out of the server.
13.If you are instructed to return the system board, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
Installing the system board
Handle
Release lever
To install the system board, complete the following steps:
232ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Hardware Maintenance Manual
