Ricoh FAX5600L manual Group 01 # * * 0 1 Yes

NETWORKINGADVANCED FEATURES

1. Make sure that the machine is in standby mode (see page 49).

2. Place your document in the feeder.

MEMORY TRANS.	OPTIONS
ENTER FAX NUMBER
_

3. Either:

❐

❐

Function 1 2

If you have programmed one of the User Function Keys to activate this feature, press that key and go to step 4.

TRANSFER

TRANSF. 1

OPTIONS

_

❐If you cannot use Function 12, you forgot to store your country code, your fax machine’s telephone number, or your ID code (Function 61). See pages 83, 84, and 85.

❐If you have installed the ISDN Option Kit, you must also program the machine’s Own ISDN G4 and Own ISDN G3 numbers (use Function 61; see pages 233 and 234). Your G4 Terminal ID and your ISDN subscriber numbers for G4 and G3 must also have been stored (this is normally done by the service representative when installing the ISDN kit).

4.Input the telephone number of the first transfer broadcasting station,

then press Yes .

❐This machine must be. of the same manufacturer as yours, and it must be able to act as a Transfer Station.

Note: Do not use the handset.

TRANSFER

TRANSF. 1 12125551234

RECV 1 _

5. Input the destinations for this transfer broadcaster.

You must use Quick Dials, Speed Dials, or Groups that are stored in the transfer broadcaster. There is a shorthand notation for this purpose. See the following examples:

❐Quick Dial Key 01: # 0 1 Yes

❐Speed Dial Code 10: # * 1 0 Yes

❐Group 01: # * * 0 1 Yes

TRANSFER		NEXT NO. OR
				START
TRANSF. 1	12125551234
RECV 2	_		TRNSF.

NOTE: You can select up to 30 Transfer Stations, and up to 30 End Receivers for each Transfer Station. (This number depends on how many numbers are currently waiting in memory to be dialed. See the table on page 43 for more information concerning the limitations to this feature.)

88