Ricoh FAX5600L 140, Switching Forwarding On/Off, Scroll through the list of features with pears

RECEPTION ADVANCED FEATURES

Switching Forwarding On/Off

Before you use Forwarding, you have to switch it on using Function 81. If it is switched off, the machine will not forward any incoming fax messages.

After you switch Forwarding on, (FORWARDING) is displayed on the operation panel when the machine is in standby mode.

You can also program a User Function Key to switch Forwarding on/off (use Function 35, see page 163). If you have done that, just press that key whe never you wish to switch Forwarding on or off.

Note: Forwarding cannot be switched on if Memory Lock is switched on. If you wish to use Forwarding, you must switch Memory Lock off.

1.

Function 6 0 2 2 2 2 8 1

PSTN LINE TYPE	SELECT
DP		TT
		YES	TO END

2.Scroll through the list of features with pears.

−

and

↓

until FORWARDING ap-

3. Change the on/off setting by pressing

←

or

→

.

4. Finish:

Yes Function

Enabling and Disabling the Forwarding Mark

The forwarding mark is printed at the receiving end on the top of each page of the fax messages that are forwarded from your machine. This mark will help the operator at the other end to recognize messages that have been forwarded. If you wish, you can switch this mark off.

To switch the Forwarding Mark on or off, do the following procedure. (See page 10 if you need more information about the User Para meter settings adjustment procedure).

1.Function 6 0 2 2 2 2 9 1

2.The settings for switch 00 are now

shown on the bottom line of the display.

USER PARAMETER		PRINT LIST
DEFAULT:	01000000
SWITCH00:	01000000		YES	TO END

140