ROUTINE OPERATION

SENDING A FAX MESSAGE

Storing the Economy Transmission Time

Before using Economy Transmission, you must use Function 74 to program a time for Economy Transmissions to start. This should be the start of the off-peak rate period for your area. After you have stored this, you will not need to change it again until your telephone company changes the starting time of the off-peak rate period.

1.

Function 6 0 2 2 2 2 7 4

ECONOMY TX

TIME= 11 :00AM

YES

TO END

2. Input the time that you always wish Economy Transmissions to To change from AM to PM and vice versa, press * or #

start.

.

3. Press

Yes Function

when the display is correct.

Voice Request (This feature requires a handset)

ROUTINE

OPERATION

Using this feature, you can have a telephone conversation with the other party, on the same call, after your fax message has been sent out. This is useful if you wish to discuss the contents of the fax message with the other party.

You can save overall telephone line costs because you don’t have to redial the other party to have the conversation.

Note: This feature cannot be used with Memory Transmission.

The following procedure tells you how to set up a Voice Request. However, refer to "Talk After Sending a Fax" on page 80 for details on how to answer the phone when it rings.

67

Page 81
Image 81
Ricoh FAX5600L manual Voice Request This feature requires a handset