ROUTINE OPERATION

SENDING A FAX MESSAGE

Sending to Just One Location

1. Make sure that the machine is in standby mode:

The display on the operation panel must be as shown on the right.

MEMORY TRANS.

APR. 4. 12:25PM

 

SET DOCUMENT

 

 

 

 

MEMORY 100%

 

 

 

 

 

2.Carefully place your fax message into the auto document feeder.

To dial without placing the message in the feeder first, see Direct Fax Number Entry on page 68.

If you only wish to scan a part of the document, use the Specified Image Area feature. See page 118 for details.

MEMORY TRANS.

OPTIONS

ENTER FAX NUMBER

 

_

 

ROUTINE

OPERATION

 

 

The pages must be placed face down in the feeder, with the first page at the bottom of the stack.

Feed the pages in so that the top edge goes in first.

Do not feed in more than 50 pages.

Do not use unsuitable types of original (see pages 45 and 46).

Adjust the document guides to fit the width of the pages.

Do not use pages of different sizes.

The pages should be arranged loosely, but the leading edges should be tidy, as shown above.

Selecting Contrast and Resolution: See page 54.

Options for Sending a Message: See page 59.

Scanning only a part of the document (Specified Image Area): See page 118.

49

Page 63
Image 63
Ricoh FAX5600L manual Sending to Just One Location, Make sure that the machine is in standby mode