Ricoh FAX5600L manual Preparing the Machine for Networking Operations, Storing the Country Code

ADVANCED FEATURES NETWORKING

Preparing the Machine for Networking Operations

Before you can start to set up fax communication networks, there are some items that you have to program in your machine. These are as follows.

❐Your Country Code

❐Your Fax Machine’s Own Telephone Number

❐Your Area Code Prefix (normally not necessary in the USA)

❐The ID Code (the ID Code of your machine and all the Relaying Terminals and Transfer Stations must be the same)

If you install the optional Group 4 ISDN kit, there are some other items that you will have to program. These are dealt with in Appendix C, which covers the ISDN kit.

You will also have to plan how you program your Groups (in co-ordination with other people at other locations who will use your machine as a Transfer Station), and you must also know how all the Relaying Terminals and Transfer Stations have programmed their Groups.

Storing the Country Code

The Country Code is the code that callers in other countries have to input when dialing a number inside your own country. For the USA, this code is ’1’.

1.Function 6 0 2 2 2 2 6 1

2.Yes

3.Input only your country code. Do not in -

put your international dial access code. Example: USA - 1

4. Yes Function

COUNTRY CODE
		TO SET	PREVIOUS
	YES
	NO	TO CANCEL	NEXT

COUNTRY CODE
	ID SETTING
	_		TO END
		YES

COUNTRY CODE YES OR CLR . NO 1_

83