INSTALLING THE MACHINE

CONNECTING THE MACHINE

A service technician will install the machine.

Before using the machine:

Make sure that it is properly connected to the telephone line and the power outlet, as shown below.

CAUTION

Do not switch on until everything is connected properly.

If you wish to move the machine to a new location, contact a service technician.

Program the Telephone Line Type setting (use Function 81; see page 28). If your telephone normally sends out tones when dialing, use the TT setting; if it normally sends out pulses, use the DP setting. Also, make sure that the switch on the handset is set up correctly.

IMPORTANT POINTS ABOUT POWER CONNECTION

The wall outlet supply must not vary more than 20 V either side of 115 Vac.

The power cord should not be laid in a place where it might trip somebody.

Do not lay anything on the power cord.

If you have to use an extension cord, make sure that it is capable of carrying 125V/15A, and that your facsimile terminal is the only piece of equipment connected to that cord.

22

Page 36
Image 36
Ricoh FAX5600L manual Connecting the Machine, Important Points about Power Connection