DISPLAYED ERROR MESSAGES

SOLVING PROBLEMS

 

 

 

OVER NO OF PROG RTI/CSI

 

You cannot store any RTIs or CSIs for use with this feature; the

 

limit has already been reached.

 

 

RTI/CSI IS NOT PROGRAMMED

 

No RTIs or CSIs have been stored for this feature.

NO PAUSE

 

You must add a pause after your area code when you input

 

your fax terminal’s own telephone number.

 

 

 

 

You cannot switch Memory Lock off while there is a received

SWITCH OFF AFTER PRINT OUT

 

fax message in the memory. You must input the Memory Lock

 

 

ID and print the message first before switching Memory Lock

 

 

off.

NOT CHANGEABLE

 

You cannot change the setting of this feature.

(FORWARDING)

 

If displayed under SET DOCUMENT in standby mode, this

 

indicates that Forwarding is now switched on.

 

 

(MEMORY LOCK)

 

If displayed under SET DOCUMENT in standby mode, this

 

indicates that Memory Lock is now switched on.

 

 

(RDS)

 

If displayed under SET DOCUMENT in standby mode, this

 

indicates that RDS is now switched on.

 

 

(POWER SAVER)

 

If displayed under SET DOCUMENT in standby mode, this

 

indicates that the Power Saver is now switched on.

 

 

ADD TONER

 

The toner cartridge is empty. Install a new cartridge.

ADD PAPER IN CASSETTE NO._

 

The indicated cassette is now empty.

CHECK ID

 

The ID that you entered is not correct. Try again.

COMMUNICATION FAIL

 

There was an error during a transmission or reception. Check

 

the error report.

 

 

CLEAR ORIGINAL

 

A document is jammed in the feeder.

CLEAR COPY

 

Paper is jammed in the printer.

CLOSE COVER

 

A cover is not closed properly. Check that all covers are closed.

UNABLE TO PRINT IN COMM.

 

You cannot print a report or make a copy while the machine is

 

sending or receiving a fax message.

 

 

UNABLE TO PROGRAM

 

This Quick Dial Key already contains a number. Try another

 

Quick Dial Key.

 

 

224

Page 238
Image 238
Ricoh FAX5600L manual 224