Ricoh FAX5600L manual 130, Switching Memory Lock On/Off, ↓ until or →, Input the Memory Lock ID

RECEPTION ADVANCED FEATURES

Switching Memory Lock On/Off

Before you can use Memory Lock, you have to switch it on using Function 81.

After you switch Memory Lock on, (MEMORY LOCK) will appear on the display when the machine is in standby mode.

Note: If you switch Memory Lock on, Forwarding will be automatically disabled.

1.

Function 6 0 2 2 2 2 8 1

PSTN LINE TYPE	SELECT
DP		TT
		YES	TO END

2. Scroll through the features with −				and
3.	Change the on/off setting by pressing
					←
4.	Finish:
		Yes	Function

↓until or →

MEMORY LOCK appears.

.

If you wish, you can prevent unidentified senders from sending you messages while Memory Lock is on. See page 131.

Printing from Memory Lock (Memory Card or Hard Disk Required)

If the Confidential File indicator is blinking, a message has been stored using Memory Lock. Print it using the following procedure.

1.Function 5 6

2.Input the Memory Lock ID.

Example: 4 6 3 3

PRT MEM. LOCK ID SETTING

MEMORY LOCK ID: _

NO TO CANCEL

PRT MEM. LOCK PRESS START

MEMORY LOCK ID: ....

3.

Start

NOTE: If the Confidential File indicator is blinking, a message has been stored using Memory Lock. However, if the Confidential File indicator is lit, a message has been stored using Confidential Reception, and the indicator no longer clearly shows the presence of files stored using Memory Lock.

130